STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and hygroscopic properties with printability.
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon which can be printed on a wide-range of FFF/FDM 3D printers.
6 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 3 loyalty points. Your cart will total 3 loyalty points that can be converted into a voucher of 0,30 €.
|Hmotnosť materiálu||0,5 kg|
|Priemer vlákna||1,75 mm|
|Odporúčaná teplota pre 3D tlač||240 - 270°C|
|Hmotnosť balenia||800 g|
Superb mechanical properties
Strong, flexible, high impact resistance, high crack resistance, high scratch resistance
Excellent chemical resistance
Excellent weather and UV resistance
Outstanding dimensional stability
Good first layer adhesion to EasyPad + DimaFix prepared print bed
Very clear in its natural form (without added colorants)
General printing guidelines *
|Nozzle size: ≥ 0.2mm||Layer height: ≥ 0.1mm||Flow rate: ± 100 - 110%|
|Print temp: ± 240 - 270° C||Print speed: Low / Medium||Retraction: Yes ± 5mm (@45mm/s)|
|Heat bed: ± 80 - 120° C||Fan speed: 10-30%||Experience level: Intermediate / Expert|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.02 g/cc||50 gr coil||0.5 Kg spool|
|Ø 1.75mm||± 20.4m||± 204m|
|Ø 2.85mm||± 7.7m||± 77m|
No customer reviews for the moment.